CERAMIC SHIELD NC9 PRO

Nano ceramic coating for cars, motorcycles, aircrafts, ships

HENDLEX CERAMIC SHIELD NC9 PRO

HENDLEX Car Body Shield NC9 PRO is improved NC9 formula with higher chemical resistance, easier application, higher color enhance and is more user-friendly.  Especially sturdy and durable nano ceramic is protective coating designed for cars and motorcycles.

This coating can be applied on painted and varnished surfaces, plastics or metals. It can be applied as a single layer or multilayer coating.

NC9 PRO nano coating is 9H hardness and long lasting protective coating for car body.

PACKED UNDER INERT GAS. Guarantee 100% effectiveness.

PACKAGE CONTENT:
  • nano ceramic shield HENDLEX CERAMIC SHIELD NC9PRO (40 ml);
  • microfiber cloth (2 pcs.);
  • application cloth;
  • coating applicator;
  • protective gloves (1 pair);
  • user manual.
PROPERTIES:
  • Easy application;
  • High chemical resistance;
  • Enhances surface hardness;
  • Smoothens minor scratches and removes holograms;
  • Provides surface strong hydrophobic properties and “easy to clean” effect. Water contact angle is 98° degrees therefore the surface remains clean longer;
  • Significantly highlights color of paint and provides it with greater shine. Does not attract dust;
  • Protects the surface from environmental impact: acids, alkalis, road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion;
  • Can be coated in several layers;
SPECIFICATION OF PRODUCT

..

Application surfaces – Painted and varnished surfaces, plastics and metals

Covered area – 40 ml for one mid-size car for two layers application

Durability –  2-5 years, depending on weathering conditions

Coating properties – Water and dirt repellency, scratch resistance

Shelf life – 6 months, without opening the bottle

…

CHEMICAL PROPERTIES

..

Thermal resistance – -30 °C to +150 °C

Chemical resistance – 2.5<pH<12.5

Coating thickness – >1000 nm

Hardness – 9H pencil

Water contact angle – 98° 

…

CONDITIONS & PACKAGING

..

Application temperature – +10 °C to +25 °C (recommended +20 °C)

Curing period – 24 hours initial, 7 days final

Storage conditions – +5 °C to +25 °C

Packaging – 40 ml aluminum bottle. Packed under inert gas

 

 

…

SURFACE PREPARATION

If car is waxed, remove wax with HENDLEX Wax Remover. Wash the car carefully and make sure there are no washing products (shampoos, dirt, solvents) left on the surface.

 

For better result it is recommended to coat polished car surface. After polishing make sure to wash the car. It is recommended to remove the remaining water using the compressed air jet.

 

It is also recommended to clean the surface with HENDLEX Paint Prepare.

COVERED AREA

40 ml for one mid-size car for two layers application. 

SURFACE COATING

The proper temperature for coating is from +10 °C to +25 °C. Cover the surface evenly in 60×60 cm areas and make sure that you did not leave uncovered spots.

 

If the temperature is higher than +25 °C, cover the smaller area. The surface must be polished within 90 seconds after coating application. If the surface gets into contact with water, immediately clean it and repeat the coating process.

CAUTION!

Recommended coating curing period:

  • if the temperature is higher than +22°C – 12 hours initial;
  • if the temperature is +20°C – 24 hours initial;
  • if the temperature is less than +18°C – need to use IR lamps (+60°C – +80°C) for at least 1 hour.

Do not wash the car for 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

en_USEN
en_USEN pl_PLPL ukUA