CERAMIC SHIELD NC9

Nano ceramic coating for cars, motorcycles, aircrafts, ships

HENDLEX CERAMIC SHIELD NC9

HENDLEX Car Body Shield NC9 is especially sturdy durable nano ceramic protective coating designed for cars and motorcycles. This coating can be applied on painted and varnished surfaces, plastics or metals.

This nano ceramic is 9H hardness and long lasting protective coating for the car body.

PACKED UNDER INERT GAS. Guarantee 100% effectiveness.

PACKAGE CONTENT:
  • nano ceramic shield Hendlex CERAMIC SHIELD NC9 (40 ml);
  • microfiber cloth (2 pcs.);
  • application cloth;
  • coating applicator;
  • protective gloves (1 pair);
  • user manual.
PROPERTIES:
  • Enhances surface hardness;
  • Smoothens minor scratches and removes holograms;
  • Provides surface strong hydrophobic properties and “easy to clean” effect. Water contact angle is 105°, therefore the surface remains clean longer;
  • Significantly highlights paint color and provides it with greater shine. Does not attract dust;
  • Protects the surface from environmental impact: acids, alkalis, road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion;
  • The coating is resistant to temperature range from -30 °C to +200 °C.
SPECIFICATION OF PRODUCT

..

Application surfaces – Painted and varnished surfaces, plastics and metals

Covered area – 40 ml for one mid-size car

Durability –  Up to 5 years, depending on weathering conditions

Coating properties – Water and dirt repellency, scratch resistance

Shelf life – 1 year without opening the bottle

…

CHEMICAL PROPERTIES

..

Thermal resistance – -30 °C to +150 °C

Chemical resistance – 3<pH<12

Coating thickness – <900nm

Hardness – 9H pencil

Water contact angle – 105°

…

CONDITIONS & PACKAGING

..

Application temperature – +10 °C to +25 °C (recommended +20 °C)

Curing period – 12 hours initial, 3 days final

Storage conditions – +5 °C to +25 °C

Packaging – 40 ml aluminum bottle. Packed under inert gas

 

 

…

SURFACE PREPARATION

If car is waxed, remove wax with HENDLEX Wax Remover. Wash the car carefully and make sure there are no washing products (shampoos, dirt, solvents) left on the surface.

 

For better result it is recommended to coat polished car surface. After polishing make sure to wash the car. It is recommended to remove the remaining water using the compressed air jet.

 

It is also recommended to clean the surface with HENDLEX Paint Prepare.

USAGE

Proper temperature for coating is from +10 °C to +25 °C. It is recommended to cover the area of 80×80 cm at the time. If the temperature is higher than +20 °C, cover the smaller area. Cover no more than 1 m2 with one non-woven fiber cloth. The surface must be polished in 20 seconds after coverage because it hardens very quickly. If the surface gets into contact with water, immediately clean it and repeat coating process.

CAUTION!

Recommended coating curing period:

  • if the temperature is higher than +22°C – 12 hours initial;
  • if the temperature is +20°C – 24 hours initial;
  • if the temperature is less than +18°C – need to use IR lamps (+60°C – +80°C) for at least 1 hour.

Do not wash the car for 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.

COVERED AREA

40 ml for one mid-size car.

en_USEN
en_USEN pl_PLPL ukUA