HS101 FOR MINERAL POLISHED SURFACES

Nano coating for mineral polished surfaces

HENDLEX HS101 HYDROPHOBIC IMPREGNATOR FOR MINERAL POLISHED SURFACES

..

..

Hendlex HS101 is colorless silicon impregnator of polished mineral surfaces. Impregnator binds to the surface by a chemical process and makes the surface hydrophobic. Impregnator is designed to make polished stone surfaces hydrophobic and protect it against environmental impact.

PROPERTIES

  • Protects the surface from moisture, absorption of dirt.
  • Creates a mild cleaning effect.
  • Surface remains air-permeable.
  • The color of the surface does not change.
  • Resistant to UV rays.
  • Prevents from mold and lichen growth.
  • Prevents dirt accumulation.
  • Protects the surface from cracking in cold temperature.
  • Protects the surface from saline and alkaline substances.
  • Covered in single application.
SURFACE PREPARATION

Remove dust, sand, oil, grease, moss, lichen, paint or other materials from the surface. All repair work (sealing of seams, uneven filling) must be carried out before covering the surface with the product. Surface must be dry.

CAUTION

Hendlex HS101 keep tightly closed in the original packaging. Protect from freezing. The product is suitable for use up to 12 months from the date of manufacture.

 

  • DO NOT impregnate wood, glass or plastic surfaces with Hendlex HS101. The surface must be protected from contact with product. 
  • It is recommended to apply Hendlex HS101 by polishing it into the surface, using soft cloth. Spread the product on the surface, wait 5-10 minutes and then polish it up. While applying, use protective gloves and respirator.
  • If there is 20⁰C and relative air humidity is not more than 55 %, the coating forms after 4 hours. If the temperature is lower and relative humidity is higher, the coating formation may take longer.
  • Tools should be washed with white spirit.
SURFACE IMPREGNATION

 It is recommended to test Hendlex HS101 on a small surface in order to determine the amount of product penetration, cost and hydrophobicity.

 

Shake the product before using. The ambient temperature should be between +4⁰C to +40⁰C. Do not use the product if within 24 hours the temperature can fall below +4 ⁰C or it can start raining in the next 4 hours.

COVERED AREA

40-60 m2/l.

en_USEN