ANTIGRAFFITI SP
The coating is designed for surfaces that are not dyed, such as, concrete, tiles, clinker, sandstone and natural stone, to protect from graffiti drawings.
Henlex Antigraffiti SP is the aqueous fluorine silane system, which provides porous mineral surfaces with hydrophobic and oleophobic qualities. After coating the wall with Hendlex Antigraffiti SP, sprayed paint begins to shrink not allowing the drawing to appear. The paint is easily cleaned from the wall using solvents of paint and high-pressure water jet.
- The coating is invisible, it does not change the color of the surface, it does not shine and there is no “wet surface” effect on the wall;
- It repels water, grease, oil and solvent-based paints from porous mineral surfaces of buildings;
- Creates air-permeable, hydrophobic and oleophobic coating;
- Provides the surface with durable protection; the coating withstands 3 or more graffiti attempts (no need to apply the product again after cleaning).
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
COVERED AREA
SHELF LIFE
SHELF LIFE
APPLICATION TEMPERATURE
CURING PERIOD
STORAGE CONDITIONS
PACKAGING
USAGE
The product is applied with multiple layers. The output depends on the absorption of the surface. It can be 100 – 300 ml/m2. The coating withstands 3 or more graffiti attempts (no need to apply the product again after cleaning). After coating the wall with Hendlex Antigraffiti SP, sprayed paint begins to shrink not allowing the drawing to appear.
CAUTION!
- To avoid runs, the product is recommended to be applied from the bottom to the top. If the surface is vertical, it is recommended to cover it from the bottom to top to prevent run off traces.
- Hendlex Antigrafitti is recommended to be applied using a low-pressure sprayer, roller or by soaking the surface.
- At +20 ⁰C and relative humidity not more than 55% the coating cures in 4 hours.
- In lower temperatures and higher relative humidity, curing time may take longer.
Find more products for the building protection here / If you have any questions about the product, please contact us
The coating is designed for surfaces that are not dyed, such as, concrete, tiles, clinker, sandstone and natural stone, to protect from graffiti drawings.
Henlex Antigraffiti SP is the aqueous fluorine silane system, which provides porous mineral surfaces with hydrophobic and oleophobic qualities. After coating the wall with Hendlex Antigraffiti SP, sprayed paint begins to shrink not allowing the drawing to appear. The paint is easily cleaned from the wall using solvents of paint and high-pressure water jet.