HC102
Sealant is designed for concrete surfaces, bricks, cement plaster, stone, terracotta products, clinker protection against moisture and environmental impact.
Properties
- Protects the surface from moisture absorption;
- The surface remains breathable;
- Does not affect the surface color;
- UV resistant;
- The product does not contain silicone, so the coated surface does not become shiny and does not have a shine surface effect;
- Penetrates deeply and reacts quickly;
- Coated surface prevents the growth of mold, lichen and dirt accumulation.
- Reduces extraction of salts to the surface;
- Protects the surface from cracking in freezing conditions;
- Protects the surface from salts and alkaline material damage;
- Applied with one coat;
- Does not contain volatile organic compounds.
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
Concrete surfaces, bricks, cement plaster, stone, terracotta products and clinker
COVERED AREA
2 – 10 m2/l depending on the surface
DURABILITY
Up to 5 years, depending on weathering conditions
SHELF LIFE
1 year
APPLICATION TEMPERATURE
+5 ˚C to +40 ˚C
CURING PERIOD
24 hours
STORAGE CONDITIONS
+5 ˚C to +40 ˚C
PACKAGING
2 l, 5 l, 25 l plastic tanks
PREPARATION OF SURFACE
Remove dust, sand, oil, grease, moss, lichen, paint or other materials from the surface. All repair work (sealing of seams, uneven filling) must be carried out before covering the surface with the product. Surface must be dry. Fresh concrete should be protected no earlier than 3 months.
USAGE
Hendlex HC102 it is recommended to test the product on a small surface in order to determine the amount of product penetration, cost, and hydrophobicity.
Shake the product before using. The ambient temperature should be between +5 ⁰C to +40 ⁰C. Do not use the product if within 24 hours the temperature can fall below +5 ⁰C or it can start raining in the next 4 hours
CAUTION!
Keep Hendlex HC102 tightly closed in the original package. Protect it from freezing. The product is suitable for use for at least 12 months from the date of manufacture.
- Do not coat Hendlex HC102 with the surface that does not absorb the product, such as wood, glass, plastic etc. During application, these surfaces must be protected against contact with the product. If there is a contact with the product, quickly rinse the surface with water as it may cause white spots. If the surface is vertical, it is recommended to cover it from the bottom to top to prevent runoff traces.
- It is recommended to cover Hendlex HC102 product with a low-pressure sprayer, roller or by soaking the surface by spilling the product on the surface.
- If it is +20 ⁰C and relative air humidity is not more than 55 %, the coating forms after 4 hours. If the temperature is lower and relative humidity is higher, the coating formation may take longer.
- Tools should be washed with water.
Find more products for the building protection here / If you have any questions about the product, please contact us
Sealant is designed for concrete surfaces, bricks, cement plaster, stone, terracotta products, clinker protection against moisture and environmental impact.
