CNP
Hendlex airplane ceramic coating CNP is manufactured for plastic aviation canopies that improve vision in every air condition providing minor resistance to the wind and repelling raindrops. Because of these properties, vision conditions are significantly improved. The CNP airplane coating is long-lasting and does not need to be used frequently.
CNP nano-ceramic coating does not crack in the air, even with high airplane body vibration. This airplane coating is sturdy and durable, safe to use and has no side effects for the airplane. Also, it removes holograms and minor scratches.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
SKU: CNP40
Properties
- Less rain drops during the rain;
- Renews surface;
- Less air friction;
- Easy bugs removal;
- Less holograms and minor scratches;
- Long lasting;
- The coating is resistant to temperature range from -30 °C to +150 °C.
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
Plastic airplane canopy
COVERED AREA
20 ml for 8 m2
DURABILITY
2-5 years, depending on weathering conditions
SHELF LIFE
1 year (unopened)
THERMAL RESISTANCE
-30 ˚C to +150 ˚C
CHEMICAL RESISTANCE
3 < pH < 12
WATER CONTACT ANGLE
106˚
APPLICATION TEMPERATURE
+10 ˚C to +25 ˚C (recommended +20 ˚C)
CURING PERIOD
24 hours initial; 7 days final
STORAGE CONDITIONS
+5 ˚C to +25 ˚C
PACKAGING
20 ml aluminium bottle
PREPARATION OF SURFACE
Adequately prepare the surface before application of Hendlex CNP. Guidelines to follow to ensure the effectiveness of the product:
- The surface must be washed thoroughly, free of any grease, contaminants, and residue.
- Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
- Highly recommended to polish the surface to remove any scratches, swirls, or holograms.
- Ensure the surface is completely dry.
Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.
USAGE
1. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
2. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Make sure there are no uncovered spots left.
3. After applying coating, wait for:
– if temperature is lower than +24 °C – 30 seconds;
– if temperature is higher than +24 °C – 20 seconds;
– do not coat if temperature is more than +30 °C.
4. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
5. Wipe the coated area with a clean part of the microfiber cloth for the perfect finish.
6. Recommended coating curing period:
– if the temperature is above +20 °C – 12 hours initial;
– if the temperature is below +20 °C – 24 hours initial.
Do not wash the airplane canopy for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Adhesive tape does not stick on the coated surface. Do not coat Hendlex CNP ceramic coating on the surface where adhesive tape will be applied.
Find more products for the aviation here / If you have any questions about the product, please contact us
Hendlex airplane ceramic coating CNP is manufactured for plastic aviation canopies that improve vision in every air condition providing minor resistance to the wind and repelling raindrops. Because of these properties, vision conditions are significantly improved. The CNP airplane coating is long-lasting and does not need to be used frequently.
CNP nano-ceramic coating does not crack in the air, even with high airplane body vibration. This airplane coating is sturdy and durable, safe to use and has no side effects for the airplane. Also, it removes holograms and minor scratches.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
