NANO CERAMIC COATING MATTE

This ceramic coating not only maintains the natural matte/satin finish but also enhances color and depth without adding gloss or altering the original matte appearance. It boasts extreme durability, offering protection for up to 2 years.
Our coating creates a supremely slick surface with superior hydrophobic properties , actively repelling water for self-cleaning and effortless maintenance. It provides comprehensive protection against intense UV, heat, and chemical resistance , safeguarding against stains, soiling, contaminants, and light wash marks.
The coating is suitable for all matte and satin-finished surfaces , including paintwork, PPF (paint protection film), vinyl wrap, and carbon fiber. Its easy, one-layer application is designed for straightforward and relaxed use.
With this ceramic coating, your matte finish will remain unique, sleek, and absolutely stunning.

SKU: CCMAT5
Package contents
  • Hendlex Nano Ceramic Coating Matte (50 ml);
  • Application pad (1 pc.);
  • Gloves (1 pc.);
Properties
  • Enhances color and depth without adding gloss or altering the original matte appearance;
  • Protection for up to 2 years;
  • Creates a supremely slick surface that actively repels water for self-cleaning and effortless maintenance;
  • Provides intense UV, heat, and chemical resistance, safeguarding against stains, soiling, contaminants, and light wash marks;
  • Suitable for all matte and satin-finished surfaces, including paintwork, PPF, vinyl wrap, and carbon fiber;
  • Easy, One-Layer Application;
  • NON yellowing;

SPECIFICATION OF PRODUCT

SPECIFICATION OF PRODUCT

PREPARATION OF SURFACE

Adequately prepare the surface before application of NANO CERAMIC COATING MATTE . Guidelines to follow to ensure the effectiveness of the product:

  • The surface must be washed thoroughly, free of any grease, contaminants, and residue.
  • Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
  • Highly recommended to polish the car to remove any scratches, swirls, or holograms.
  • Ensure the surface is completely dry.

Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.

USAGE

Ensure the surface is clean, dry, and free of any grease or wax. Wet the application pad entirely. Throughout the process of coating, keep the application pad wet by applying additional 5-6 drops. Apply a thick wet layer evenly on a small section. Make sure there are no uncovered spots left. Allow the coating to cute for about 5 minutes and then proceed to polish with microfiber cloth until smooth finish is achieved.

 

CAUTION!

Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Hazardous substances: Hydrocarbons, C9-C10, n-alkanes, isoalkanes, cyclics, <2% aromatics. Cyclosilazanes, di-Me, Me hydrogen, polymers with di-Me, Me hydrogen silazanes, reaction products with 3-aminopropyltriethoxysilane. Hazard statements: Flammable liquid and vapour. May be fatal if swallowed and enters airways. Causes severe skin burns and eye damage. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Precautionary statements: Keep out of reach of children. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a doctor. Store locked up. Dispose of contents/container to by handing over to the person authorized to dispose of waste or by returning to the supplier.

Find more products for the vehicle here / If you have any questions about the product, please contact us

Hendlex NANO CERAMIC COATING MATTE preserves your matte/satin finish while enhancing color and depth without gloss. Lasting up to 2 years, it offers UV, heat, and chemical protection, plus a slick, hydrophobic surface for easy cleaning. Ideal for matte paint, PPF, vinyl wraps, and carbon fiber—easy one-layer application keeps your finish sleek and stunning.

Follow Us