NC9 PRO set
Ceramic Shield NC9 Pro is the nano-coating for professional use, suitable for the car body and especially for the car‘s lights and alloy rims because it firmly sticks to the surface. Due to that reason, the NC9 Pro ceramic coating strongly protects the car body, lights, and rims.
NC9 Pro nano-coating is manufactured from improved NC9 formula, which features stronger chemical resistance, more accessible application, and colour intensity. The ceramic coating is sturdy and durable and designed for cars and motorcycles.
The Ceramic Shield NC9 Pro can be applied on painted and varnished surfaces, plastics or metals and used as a single-layer or multilayer coating.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
Package contents
Properties
- Ceramic coating Hendlex NC9 Pro (40 ml)
- Microfiber cloth (1 pc.)
- Coating applicator
- Application cloth
- Gloves (1 pair)
- Application manual
- High chemical resistance;
- Enhances surface hardness;
- Smoothens minor scratches and removes holograms;
- Provides applied area an “easy to clean” effect and strong hydrophobic properties, resulting in the surface remaining clean for a longer period of time;
- Significantly highlights the finish of surface, bringing out a greater shine;
- Does not attract dust;
- Protects the surface from environmental impact including: acids, alkalis (resistant to pH 2.5 – 12.5), road salts and UV rays.
- Protects the surface from aging and provides it with additional protection from corrosion;
- Can be coated in several layers;
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
Painted and varnished surfaces, plastic, and metals
COVERED AREA
40 ml for one mid-size car for two layers application
DURABILITY
Up to 2 years, depending on weathering conditions
SHELF LIFE
6 months (unopened)
THERMAL RESISTANCE
-50 ˚C to +150 ˚C
CHEMICAL RESISTANCE
2.5 < pH < 12.5
WATER CONTACT ANGLE
98˚
APPLICATION TEMPERATURE
+10 ˚C to +25 ˚C (recommended +20 ˚C)
CURING PERIOD
24 hours initial; 7 days final
STORAGE CONDITIONS
+5 ˚C to +25 ˚C
PACKAGING
Aluminium box
PREPARATION OF SURFACE
Adequately prepare the surface before application of Hendlex NC9 PRO. Guidelines to follow to ensure the effectiveness of the product:
- The surface must be washed thoroughly, free of any grease, contaminants, and residue.
- Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
- Highly recommended to polish the car to remove any scratches, swirls, or holograms.
- Ensure the surface is completely dry.
Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.
USAGE
1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.
*For smaller areas it is recommended to solely use the application cloth without using the applicator.
2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.
4. After applying coating, wait for:
– if temperature is lower than +24 °C – 2 minutes;
– if temperature is higher than +24 °C – 15-20 seconds;
– do not coat if temperature is more than +30 °C.
5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
6. Recommended coating curing period:
– if the temperature is higher than +22°C – 12 hours initial;
– if the temperature is +20°C – 24 hours initial.
Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Find more products for the vehicle here / If you have any questions about the product, please contact us
Ceramic Shield NC9 Pro is the nano-coating for professional use, suitable for the car body and especially for the car‘s lights and alloy rims because it firmly sticks to the surface. Due to that reason, the NC9 Pro ceramic coating strongly protects the car body, lights, and rims.
NC9 Pro nano-coating is manufactured from improved NC9 formula, which features stronger chemical resistance, more accessible application, and colour intensity. The ceramic coating is sturdy and durable and designed for cars and motorcycles.
