PPF&VINYL set
HENDLEX PPF&Vinyl protective coating is a nano-ceramic coating for film-covered cars and vinyl care. It offers additional protection for PPF&Vinyl films that highlight the car’s colour and makes it easier to take care of your vehicle. The protective ceramic coating provides unique features for the car’s film that do not attract dust and grease.
PPF&Vinyl nano-coating has strong hydrophobic properties and provides an effect of shine. The ceramic coating boosts the surface’s hardness and prevents the PPF and vinyl films from ageing. Also, the coating is resistant to temperatures ranging from -50 °C to +150 °C.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
- Nano ceramic coating Hendlex PPF&VINYL (40 ml)
- Microfiber cloth (1 pc)
- Coating applicator
- Application cloth
- Gloves (1 pair)
- Application manual
- Enhances surface hardness;
- Provides applied areas an “easy to clean” effect and strong hydrophobic properties, resulting in the surface remaining clean for a longer period of time;
- Significantly highlights the finish of surface, bringing out a greater shine;
- Does not attract dust;
- Protects the surface from environmental impact including: acids, alkalis (resistant to pH 3-12), road salts, UV rays;
- Prevents the surface from aging;
- Resistant to temperatures ranging from -50 °C to +150 °C. Significantly highlights the paint color and provides it with greater shine. Does not attract dust.
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
COVERED AREA
DURABILITY
SHELF LIFE
THERMAL RESISTANCE
CHEMICAL RESISTANCE
WATER CONTACT ANGLE
APPLICATION TEMPERATURE
CURING PERIOD
STORAGE CONDITIONS
PACKAGING
OUR VIDEOS
OUR VIDEOS
PREPARATION OF SURFACE
Before usage of Hendlex PPF&VINYL, ensure the surface is clean and dry by following these steps:
- Wash the car thoroughly, making sure there are no remaining substances that would interfere with the coating’s application (i. e. cleaning agents, dirt residue, solvents, etc.)
- Proceed to dry the surface entirely, including the spatial gaps between adjacent car parts.
Note: It is recommended to utilize HENDLEX Paint Prepare to guarantee a clean surface.
USAGE
1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.
*For smaller areas it is recommended to solely use the application cloth without using the applicator.
2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Coat the area of 1×1 m at the time. If temperature is higher than +24°C, coat smaller area. Make sure there are no uncovered spots left.
4. After applying coating, wait for:
– if temperature is lower than +24 °C – 2 minutes;
– if temperature is higher than +24 °C – 30 – 90 seconds;
– do not coat if temperature is more than +30 °C.
5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
6. Recommended coating curing period:
– if the temperature is higher than +22°C – 12 hours initial;
– if the temperature is +20°C – 24 hours initial.
Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
![](https://hendlex.com/wp-content/uploads/2022/12/Vector-5-1.webp)
Find more products for the vehicle here / If you have any questions about the product, please contact us
HENDLEX PPF&Vinyl protective coating is a nano-ceramic coating for film-covered cars and vinyl care. It offers additional protection for PPF&Vinyl films that highlight the car’s colour and makes it easier to take care of your vehicle. The protective ceramic coating provides unique features for the car’s film that do not attract dust and grease.
PPF&Vinyl nano-coating has strong hydrophobic properties and provides an effect of shine. The ceramic coating boosts the surface’s hardness and prevents the PPF and vinyl films from ageing. Also, the coating is resistant to temperatures ranging from -50 °C to +150 °C.