NC9 set
Ceramic Shield NC9 is one of the first ceramic coatings manufactured by our laboratory. Ceramic Shield NC9 is recommended for professionals and car owners who would like to apply the protective ceramic coating by themselves at home. It takes more time to apply this coating and cannot be used in large areas. The nano-coating strengthens the surface hardness, smoothens minor scratches and removes holograms. It also protects vehicles from environmental impacts such as road salts, alkalis, acids, and UV rays.
The Ceramic Shield NC9 Pro can be applied on painted and varnished surfaces, plastics or metals and used as a single-layer or multilayer coating.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
SKU: NCR9
Package contents
Properties
- Ceramic coating Hendlex NC9 (40 ml)
- Microfiber cloth (2 pcs.)
- Coating applicator
- Application cloth
- Gloves (1 pair)
- Application manual
- Enhances surface hardness;
- Smoothens minor scratches and removes holograms;
- Provides surface strong hydrophobic properties and “easy to clean” effect. Water contact angle is 105°, therefore the surface remains clean longer;
- Significantly highlights paint color and provides it with greater shine. Does not attract dust;
- Protects the surface from environmental impact: acids, alkalis, road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion;
- The coating is resistant to temperature range from -30 °C to +150 °C.
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
Painted and varnished surfaces, plastic, and metals
COVERED AREA
40 ml for one mid-size car
DURABILITY
Up to 5 years, depending on weathering conditions
SHELF LIFE
1 year (unopened)
THERMAL RESISTANCE
-30 ˚C to +150 ˚C
CHEMICAL RESISTANCE
3 < pH < 12
WATER CONTACT ANGLE
105˚
APPLICATION TEMPERATURE
+10 ˚C to +25 ˚C (recommended +20 ˚C)
CURING PERIOD
24 hours initial; 7 days final
STORAGE CONDITIONS
+5 ˚C to +25 ˚C
PACKAGING
Aluminium box
OUR VIDEOS
OUR VIDEOS
PREPARATION OF SURFACE
Adequately prepare the surface before application of Hendlex NC9. Guidelines to follow to ensure the effectiveness of the product:
- The surface must be washed thoroughly, free of any grease, contaminants, and residue.
- Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
- Highly recommended to polish the car to remove any scratches, swirls, or holograms.
- Ensure the surface is completely dry.
Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.
USAGE
1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.
*For smaller areas it is recommended to solely use the application cloth without using the applicator.
2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.
4. After applying coating, wait for 20 seconds.
Do not coat if temperature is more than +30 °C.
5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
6. Recommended coating curing period:
– if the temperature is higher than +22°C – 12 hours initial;
– if the temperature is +20°C – 24 hours initial.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Find more products for the vehicle here / If you have any questions about the product, please contact us
Ceramic Shield NC9 is one of the first ceramic coatings manufactured by our laboratory. Ceramic Shield NC9 is recommended for professionals and car owners who would like to apply the protective ceramic coating by themselves at home. It takes more time to apply this coating and cannot be used in large areas. The nano-coating strengthens the surface hardness, smoothens minor scratches and removes holograms. It also protects vehicles from environmental impacts such as road salts, alkalis, acids, and UV rays.
The Ceramic Shield NC9 Pro can be applied on painted and varnished surfaces, plastics or metals and used as a single-layer or multilayer coating.
