Back
Hendlex-HC101_1024x1024

HC101

Hendlex HC101 is colorless sealant of porous mineral surfaces. The product is water based and is free of organic solvents. Hendlex HC101 is absorbed into the pores and makes the surface hydrophobic. Sealant is durable and binds to the surface by a chemical process.

The product is designed for high-absorbing surfaces, such as concrete surfaces, sand-lime bricks, cement plaster, stone protection against moisture and environmental impact.

Download all products catalogue

Download products Technical Data Sheets

Properties
  • Protects the surface from moisture absorption;
  • The surface remains breathable;
  • Does not affect the surface color;
  • UV resistant;
  • The product does not contain silicone, so the coated surface does not become shiny and does not have a wet surface effect;
  • Penetrates deeply and reacts quickly;
  • Coated surface prevents the growth of mold, lichen and dirt accumulation;
  • Reduces extraction of salts to the surface;
  • Protects the surface from cracking in freezing conditions;
  • Protects the surface from salts and alkaline material damage;
  • Applied with one coat;
  • Does not contain volatile organic compounds.

SPECIFICATION OF PRODUCT

SPECIFICATION OF PRODUCT

APPLICATION SURFACES

Porous mineral surfaces, concrete, cement plaster and stone surfaces

COVERED AREA

2 – 10 m2/l depending on the surface

SHELF LIFE

Up to 5 years, depending on weathering conditions

APPLICATION TEMPERATURE

+5 ˚C to +40 ˚C

CURING PERIOD

24 hours

STORAGE CONDITIONS

+5 ˚C to +40 ˚C

PACKAGING

2 l, 5 l, 25 l plastic tanks

PREPARATION OF SURFACE

Remove dust, sand, oil, grease, moss, lichen, paint or other materials from the surface. All repair work (sealing of seams, uneven filling) must be carried out before covering the surface with the product. Surface must be dry. Fresh concrete should be protected no earlier than 3 months.

USAGE

Dilute Hendlex HC101 by dilution ration specified in the table. It is recommended to test the product on a small surface in order to determine the amount of product penetration, cost, and hydrophobicity.

Shake the product before using. The ambient temperature should be between +5 ⁰C to +40 ⁰C. Do not use the product if within 24 hours the temperature can fall below +5 ⁰C or it can start raining in the next 4 hours.

CAUTION!

Keep Hendlex HC101 tightly closed in the original package. Protect it from freezing. The product is suitable for use for at least 12 months from the date of manufacture.

  • Do not use Hendlex HC101 with the surface that does not absorb the product, such as wood, glass, plastic etc. During application, these surfaces must be protected against contact with the product. If there is a contact with the product, quickly rinse the surface with water as it may cause white spots. If the surface is vertical, it is recommended to cover it from the bottom to top to prevent runoff traces.
  • It is recommended to cover Hendlex HC101 product with a low-pressure sprayer, roller or by soaking the surface by spilling the product on the surface
  • If it is +20 ⁰C and relative air humidity is not more than 55 %, the coating forms after 4 hours. If the temperature is lower and relative humidity is higher, the coating formation may take longer.
  • Tools should be washed with water.

Dilute product with clean water. The diluted product should be consumed within 7 days.

 RATE OF DILUTION

No diluted

1:1 (1 liter HC101 and 1 liter of water = 2 liters

1:3 (liter HC101 and 3 liters of water = 4 liters

OUTPUT

(Depends on absorption of the surface)

2-10m²/l

2-10m²/l if using the diluted product (equivalent to 4-20m²/l  undiluted product)

8-20m²/l  if using the diluted product (equivalent to 32-80 m²/l  undiluted product

Find more products for the building protection here / If you have any questions about the product, please contact us

Hendlex HC101 is colorless sealant of porous mineral surfaces. The product is water based and is free of organic solvents. Hendlex HC101 is absorbed into the pores and makes the surface hydrophobic. Sealant is durable and binds to the surface by a chemical process.

The product is designed for high-absorbing surfaces, such as concrete surfaces, sand-lime bricks, cement plaster, stone protection against moisture and environmental impact.

Follow Us
FacebookInstagram