M3X set
Hendlex M3X ceramic coating is new formula of M3 nano ceramic with enhanced properties and with environmentally safe solvent. The innovative ceramic coating for vehicle body features a more substantial colour-highlighting effect. Because the vehicle’s surface gets slippery, it does not attract grease, water, and dust. The ceramic coating M3X is highly hydrophobic, has 9H hardness and is sturdy and outstandingly durable, which ensures longevity. The updated product version of Hendlex M3 nano-coating provides a better gloss effect for the car body, also protects the car body from adverse environmental impacts, such as acids, alkalis, road salts and UV rays.
PACKED UNDER INERT GAS. Guaranteed 100% effectiveness.
Package contents
Properties
- Ceramic coating Hendlex M3X (40 ml)
- Microfiber cloth (1 pc.)
- Coating applicator
- Application cloth
- Gloves (1 pair)
- Application manual
- Easy application;
- Enhances surface hardness;
- Smoothens minor scratches and removes the holograms;
- Provides applied area an “easy to clean” effect and strong hydrophobic properties, resulting in the surface remaining clean for a longer period of time;
- Strongly highlights the finish of surface, bringing out a greater shine; Higher gloss effect;
- Provides applied area a high slip effect. Does not attract dust;
- Protects the surface from environmental impact including: acids, alkalis (resistant to pH 3-12), road salts, UV rays;
- Environmentally friendly solvent.
SPECIFICATION OF PRODUCT
SPECIFICATION OF PRODUCT
APPLICATION SURFACES
Painted and varnished surfaces, plastic, and metals
COVERED AREA
40 ml for one mid-size car for two layers application
DURABILITY
Up to 2 years, depending on weathering conditions
SHELF LIFE
1 year (unopened)
THERMAL RESISTANCE
-50 ˚C to +150 ˚C
CHEMICAL RESISTANCE
3 < pH<12
WATER CONTACT ANGLE
112˚
APPLICATION TEMPERATURE
+10 ˚C to +25 ˚C (recommended +20 ˚C)
CURING PERIOD
24 hours initial; 7 days final
STORAGE CONDITIONS
+5 ˚C to +25 ˚C
PACKAGING
Aluminium box
OUR VIDEOS
OUR VIDEOS
Previous
Next
PREPARATION OF SURFACE
Adequately prepare the surface before application of Hendlex M3. Guidelines to follow to ensure the effectiveness of the product:
- The surface must be washed thoroughly, free of any grease, contaminants, and residue.
- Prior coatings or waxes should be removed. Hendlex Wax Remover is recommended.
- Highly recommended to polish the car to remove any scratches, swirls, or holograms.
- Ensure the surface is completely dry.
Note: it is recommended to use Hendlex Paint Prepare before applying coating for best results.
USAGE
1. Handle the applicator by the base. Place the application cloth on the soft part of the applicator, tightening it into cutouts on both sides.
*For smaller areas it is recommended to solely use the application cloth without using the applicator.
2. Open the bottle and wet the application cloth entirely. Throughout the process of coating, keep the application cloth wet by applying additional 5-6 drops.
3. Coat the surface evenly in criss-cross motion. Do not use circular movements for product coating. Coat one panel at the time. Try to coat from edge to edge to avoid coating layering marks. Make sure there are no uncovered spots left.
4. After applying coating, wait for:
– if temperature is lower than +24 °C – 3 minutes;
– if temperature is higher than +24 °C – 1 minute;
– do not coat if temperature is more than +30 °C.
5. Polish the surface with the high quality microfiber cloth. Make sure there are no unpolished spots left.
6. Recommended coating curing period:
– if the temperature is higher than +22°C – 12 hours initial;
– if the temperature is +20°C – 24 hours initial.
Do not wash the car for at least 7 days. Depending on the environment temperature, the coating fully hardens in 7 days.
CAUTION!
Do not apply the coating on matte surfaces or direct sunlight.
Proper application temperature range: +10 °C to +25 °C.
Do not coat if temperature is more than +30 °C.
Upon finishing applying the coating, polish it by using microfiber cloth.
Ensure there are no spots left unpolished.
Find more products for the vehicle here / If you have any questions about the product, please contact us
Hendlex M3X ceramic coating is new formula of M3 nano ceramic with enhanced properties and with environmentally safe solvent. The innovative ceramic coating for vehicle body features a more substantial colour-highlighting effect. Because the vehicle’s surface gets slippery, it does not attract grease, water, and dust. The ceramic coating M3X is highly hydrophobic, has 9H hardness and is sturdy and outstandingly durable, which ensures longevity. The updated product version of Hendlex M3 nano-coating provides a better gloss effect for the car body, also protects the car body from adverse environmental impacts, such as acids, alkalis, road salts and UV rays.
