SHOWER CABIN PROTECTION SET

Hendlex Shower Cabin protection set is designed to be used on glass shower cabins. Included coating repels water and dirt, preventing hard water stains and the accumulation of limescale, soap scum, or other grime. Treated glass remains visually clear and aesthetically pleasing with minimal effort. Harsh chemical cleaning agents are not necessary, wet microfiber cloth is sufficient for cleaning.
[wcj_product_wholesale_price_table]

SKU: HCSCS
Package contents
  • Hendlex Shower Cabin (30 ml)
  • Hendlex Nano Scrub (50 ml)
  • Spray nozzle attachment for Hendlex Nano Scrub
  • Cleaning and application cloths (2 pcs.)
  • Microfiber cloth
  • Gloves (1 pair)
Properties
  • Repels water and dirt;
  • Self-cleaning effect;
  • Prevents hard water stains;
  • Last up to 12 months.

SPECIFICATION OF PRODUCT

SPECIFICATION OF PRODUCT

OUR VIDEOS

OUR VIDEOS

NANO COATING SHOWER CABIN

Protection from limescale and water

Nano coating designed for glass shower cabins. It forms a thin hydrophobic layer that repels water and dirt, preventing hard water stains, soap deposits, and other contaminants from accumulating on the surface. Treated glass retains its original appearance, remaining perfectly clear.

CLEANER SURFACE PREPARE

Effectively cleans the surface

Concentrated cleaner for surface preparation before applying nano coatings. Effectively removes grease residue, fingerprint marks, and other minor contaminants, leaving the surface perfectly clean and dry. Suitable to be used on glass, plastic, metal, ceramic, and other non-wetting materials.

USAGE

PREPARE THE SURFACE WITH SURFACE SCRUB CLEANER

  1. Replace the bottle cap with the spray nozzle included in the set.
  2. Shake the product well for at least 20 seconds before every usage.
  3. Spray it evenly on the surface.
  4. Rub the cleaner into the surface thoroughly with the blue cleaning cloth, going over the same spot a few times.
  5. Wash the surface carefully with water, making sure there is no residue left.
  6. Dry off the excess water and allow the surface to dry completely before applying the nano coating.

APPLY SHOWER CABIN NANO COATING

  1. Ensure the surface is clean, dry, and grease-free.
  2. Apply 6-8 drops of nano coating on the grey application cloth.
  3. Buff the coating into the glass in a circular motion. Apply additional coating on the application cloth as necessary. Ensure the surface is fully coated. Do not coat area larger than 50×50 cm at once. Wipe off any coating that gets on other surfaces.
  4. Allow the coating to cure for 10 minutes. If the product has been applied correctly, there should be a white haze visible on the surface.
  5. Polish the surface with the soft microfiber cloth (included in the set) until the glass appears clear. Ensure there are no spots left unpolished.
  6. Avoid contact with water for at least 4 hours.

PAVIRŠIŲ NUVALYTI SU SURFACE SCRUB VALIKLIU

  1. Atsukite buteliuko kamštelį ir jį pakeiskite į purkštuką (pridėta rinkinyje).
  2. Kaskart prieš naudojant valiklį gerai suplakti apie 20 sekundžių.
  3. Užpurkškite valiklio ant paviršiaus.
  4. Įtrinkite paviršių su valymui skirta mėlyna šluoste. Įtrynimo procesą kartokite kelis kartus.
  5. Paviršių švariai nuplaukite vandeniu. Įsitikinkite, kad priemonės neliko ant paviršiaus.
  6. Nusausinkite paviršių su šluoste ir leiskite jam pilnai išdžiūti. Įsitikinkite, kad vandens neliko ant paviršiaus.

PAVIRŠIŲ PADENGTI SU SHOWER CABIN NANO DANGA

  1. Įsitikinkite, kad paviršius yra visiškai švarus, neriebus ir sausas.
  2. Užlašinkite 6-8 lašus nano dangos ant dengimui skirtos pilkos šluostės.
  3. Sukamaisiais judesiais įtrinkite priemonę į paviršių. Jei reikia užlašinkite papildomą dangos kiekį ant šluostės. Įsitikinkite, kad visas paviršius yra įtrintas. Vienu kartu nedenkite didesnio nei 50×50 cm ploto. Priemonei patekus ant kitų paviršių juos nuvalykite.
  4. Palaukite apie 10 minučių, kol paviršius nudžius. Nudžiūvus paviršiui ant jo turi matytis baltas rūkas, tai parodo, jog danga padengta tinkamai.
  5. Nublizginkite paviršių su mikropluošto šluoste, kol neliks dangos pertekliaus ir žymių. Įsitikinkite, kad neliko nenublizgintų vietų.
  6. 4 valandas saugoti paviršių nuo kontakto su vandeniu.

CAUTION!

  1. Apply Shower Cabin nano coating in a well-ventilated area.
  2. Do not apply in direct sun or on hot surface. Proper application temperature: +10 ˚C to +25 ˚C. Do not apply the coating in temperatures above +30 ˚C.
  3. Clean the surface with a damp cloth. Do not use any chemical cleaners.
  4. There is no visual difference before and after application; the coating is completely transparent and invisible.
  1. Paviršius turi būti švariai nuvalytas su įprastomis valymo priemonėmis prieš naudojant nano dangas. Įsitikinkite, kad ant paviršiaus neliko kalkių nuosėdų, muilo likučių, kitų nešvarumų ar vandens.
  2. Prieš naudojant nano dangą paviršių nuvalykite su SURFACE SCRUB valikliu esančių rinkinyje.
  3. Shower Cabin nano dangą naudokite gerai vėdinamose patalpose.
  4. Priemonės nenaudokite esant tiesioginiams saulės spinduliams ir ant įkaitusių paviršių. Naudojimui tinkama temperatūra +10 °C – +25 °C. Nenaudokite priemonės esant didesnei nei +30 °C temperatūrai.
  5. Priemonės likutį galima sunaudoti iki galiojimo datos, nurodytos ant pakuotės.
  6. Rinkinyje esanti mikropluošto šluostė yra daugkartinio naudojimo, ją galima skalbti.

Find more products for the home here / If you have any questions about the product, please contact us

Hendlex Shower Cabin protection set is designed to be used on glass shower cabins. Included coating repels water and dirt, preventing hard water stains and the accumulation of limescale, soap scum, or other grime. Treated glass remains visually clear and aesthetically pleasing with minimal effort. Harsh chemical cleaning agents are not necessary, wet microfiber cloth is sufficient for cleaning.

Follow Us